Bathroom advice for Burnley
Cold bathroom in an old house: how to warm it up and stop the damp
Many terraced houses in Burnley were built before anyone thought of insulating a wall. If your bathroom is cold, wet and mouldy, the cause is usually plain: warm steam hits a cold surface and turns to water.
Fix the cold surface and the steam, and most of the damp goes with them. Here is how.
Why an old bathroom is cold
Terraces built in the nineteenth century usually have solid walls with no cavity. An outside wall in the bathroom stays cold all winter, and that is where the black mould starts.
Many of these houses had no bathroom when they were built, and one was added later in a back bedroom or an extension. That often means one or two outside walls and a window that is rarely open.
Step one: get the steam out
An extractor fan is the cheapest cure. The cost guide puts replacing a fan at about £200 and fitting one where there was none at about £300.
Make sure it vents outside, not into the loft, and that it runs for a while after you leave the room. A humidity sensor or a timer does this for you.
Step two: warm the walls and floor
A heated towel rail does double duty, drying towels and warming the room. One cost guide gives £350 to £800 to have one fitted. Make sure it is big enough for the room.
Electric underfloor heating goes under a new floor. The cost guide gives £240 to £300 for a 4 square metre bathroom, materials and labour, before the new floor is laid on top.
Step three: line the cold wall
The best moment to insulate an outside wall is when the room is bare during a refit. Insulated board goes on the wall before it is panelled or tiled, so the surface stays warmer and steam has less reason to turn to water.
Waterproof wall panels also help, because they have no grout to hold damp. See our page on bathroom wall panels.
Small habits that help
- Keep the door shut while you shower, so the steam does not drift to colder rooms.
- Wipe the window and the walls with a squeegee or cloth.
- Do not dry washing in the bathroom.
- Wash off mould with a proper mould cleaner and fix the cause, or it will come back.
What it costs, in guide figures
- Replacing an extractor fan: about £200 (the extractor fan cost guide).
- Fitting a fan where there was none: about £300 (same guide).
- A heated towel rail fitted: £350 to £800 (the new bathroom cost guide).
- Electric underfloor heating for a 4 square metre bathroom: £240 to £300 (the underfloor heating cost guide).
These are UK guide figures, not quotes. Our bathroom cost calculator shows each one.
Which one first?
If the room runs with water on the walls, start with the fan. If the room is simply cold to stand in, start with the towel rail or the floor. If it is both and the wall is bare, a refit is the time to do all three together.
A fitter looking at the room can tell you which of these would make the most difference to yours.
Damp damages a bathroom slowly
Condensation that sits on a wall every day lifts paint, softens plaster and blackens sealant. A fan and a little heat cost far less than replacing a bathroom the damp has spoilt.
Tell us about the bathroom and which part of Burnley you are in. Asking is free.